We're open! Order online or visit our showroom by appointment. Email sales@dokterandmisses.com.

< View all tables and desks

Slide

Side Table
Previous Next
ZAR 4900
POWDER COATED SURFACES
Powder coating is a generally hard-wearing surface coating; it can however chip if dropped or knocked and anything sharp or rough can scratch it. Certain chemicals can damage a powder coated surface. Follow care instructions to protect this finish.
Open Instructions
Soak a soft cloth in lukewarm water mixed with a small concentration of pH-neutral detergent such as dishwashing liquid. Wipe dry afterwards.

Avoid using chemical, polish or oil treatments on furniture as they could damage or mark the surface.

Solvents such as nail polish remover or turpentine will damage the surface.

Don't use detergent containing ammonia or bleach. Don't use Handy Andy.

Use a soft cloth; don't use abrasive cleaning materials such as scouring pads.

Products are intended for interior use only, unless specified.

Prolonged exposure to moisture could affect the surface finish, especially if the powder coating has been damaged.
PRODUCTS IN COASTAL AREAS
Exposure to a coastal climate calls for some special attention.
Open Instructions
If you live at the coast, regular (weekly) cleaning with a damp cloth will help remove any concentration of salt deposits that can lead to finish failure.

Be sure to wipe dry afterwards.

Although powder coating is generally a sufficient coating for steel we also offer an additional rust-coating treatment for products that are destined for coastal environments. Ask our sales team for more information should you be concerned about rust becoming a problem.