We're open! Order online or visit our showroom by appointment. Email sales@dokterandmisses.com.

< View all lamps

Moonjelly

Single Pendant
Previous Next
ZAR 13800
POWDER COATED SURFACES
Powder coating is a generally hard-wearing surface coating; it can however chip if dropped or knocked and anything sharp or rough can scratch it. Certain chemicals can damage a powder coated surface. Follow care instructions to protect this finish.
Open Instructions
Soak a soft cloth in lukewarm water mixed with a small concentration of pH-neutral detergent such as dishwashing liquid. Wipe dry afterwards.

Avoid using chemical, polish or oil treatments on furniture as they could damage or mark the surface.

Solvents such as nail polish remover or turpentine will damage the surface.

Don't use detergent containing ammonia or bleach. Don't use Handy Andy.

Use a soft cloth; don't use abrasive cleaning materials such as scouring pads.

Products are intended for interior use only, unless specified.

Prolonged exposure to moisture could affect the surface finish, especially if the powder coating has been damaged.
GLASS
We use toughened glass to ensure safety.
Open Instructions
Clean with glass or mirror cleaner and a soft cloth.

Take care not to use any glass / mirror cleaning product on a powder coated surface.

Anything sharp or rough can scratch a glass surface.

Ensure that glass tabletops are securely positioned on their base. Remove glass tabletops when moving tables.
ELECTRICAL PRODUCTS
Proper care of electrical products is essential to ensure user safety.
Open Instructions
Warm white, low-wattage LED globes are recommended.

Not suitable for outdoor use.

Avoid contact with liquids.

Don't use if electrical components are damaged or loose.

Unplug product when cleaning.

Unplug product when changing the globe.