Email sales@dokterandmisses.com or visit ALWAYS WELCOME a new store for local designer homeware at Hyde Park corner

< View all lamps

Heartbeat

standing lamp
Previous Next
ZAR 9000
POWDER COATING
Powder coating is a generally hard-wearing surface coating; it can however chip if dropped or knocked and sharp surfaces can scratch it. Follow care instructions to protect this finish.
Open Instructions
Soak a soft cloth in lukewarm water mixed with a small concentration of pH neutral detergent such as dish-washing liquid. Wipe dry afterwards.

Avoid using chemical, polish or oil treatments on furniture as it could damage or mark the surface.

Solvents such as nail polish remover or turpentine will damage the surface.

Do not use detergent containing ammonia or bleach. Do not use Handy Andy.

Use a soft cloth, do not use abrasive cleaning materials such as scouring pads.

Products are intended for interior use only, unless specified.

Prolonged exposure to moisture could affect the surface finish, especially if the powder coating has been damaged.
FABRIC LAMPSHADE
Fabric lampshades can be replaced or recovered over time. Follow the below instructions to prolong the life of this kind of lampshade.
Open Instructions
Dust regularly to avoid dust build-up.

Lampshade can be cleaned by dabbing with washing powder foam, followed by a damp cloth. Leave to dry away from direct sunlight.

Avoid prolonged exposure to the sun / heat as shade could deform.

Transport fabric lampshades in a box – the wire frame of the shade can be bent if not packaged properly.
ELECTRICAL PRODUCTS
Proper care of electrical products is essential to ensure user-safety.
Open Instructions
The use of warm white, low-wattage LED globes is are recommended.

Not suitable for outdoor use.

Avoid contact with liquids.

Do not use if electrical components are damaged or loose.

Unplug product when cleaning.

Unplug product when changing the globe.